Search results

  1. C

    Powering off Texecom Premier Elite and avoiding siren going off

    I have a Texecom Premier Elite 24 with Smartcom installed. I am going to integrate this alarm to Home Assistant using the Crestron protocol, so I am about to install a Premier Elite Comport+ to give me a 3rd comm port and then install a ComIP - which I will use for the Crestron/Home Assisstant...
  2. C

    New system: Zones; Opentherm; Weather Compensation - what is best!?

    Hi, Short Summary Long post with full background coming: but basically, we have a combi boiler and looking to move to a system boiler with an unvented cylinder. We have been exploring options for boilers and controls and getting a bit lost in what's 'best' out of the various options e.g...
  3. C

    Upgrading Texecom Premier Elite via Texecom Cloud

    I have a Texecom Premier Elite 24 which is currently running firmware version V5.01.03 LS1. It is connected to a SmartCom which was running v03 firmware. I have just used the Texecom Cloud Services (cloud.texe.com) to upgrade the SmartCom to v04.04.00. I would now like to proceed with an...
  4. C

    Wiring SC517/WH door contact

    I purchased a Texecom Premier Elite 24 kit and have wired it up myself. All of the Texecom PIR sensors which were included are wired in EOL and are working correctly. I am now trying to get the door contacts working. The contacts that were included have a sticker on them saying "CQR Maximal...
  5. C

    Turn off Texecom Premier Elite 24 for maintainence?

    Hi, I DIY installed a Texecom Premier Elite 24 into my home and it has been working fine. I now wish to install a second sounder for the back of the house. I'm not clear how to power off the AC and battery to the panel so that I can safely work on the wiring. Any advice would be appreciated.
  6. C

    Correct way to fit low profile shower tray?

    I purchased the following Duravit Shower Tray (1500x700): https://www.duravit.co.uk/products/all_series/starck_tubs__showers.com-en.html?product=1616323 I have not yet unboxed it, but from the drawings it looks like the profile on the bottom of the tray is sloped - with a 20mm 'lip' all the...
  7. C

    Leaking bathroom tap

    I have a bathroom tap which has a slow dripping leak. The leak seems to be coming from a connector joning the steel hose to the plastic pipe. This affects only the cold side. The hot side is not leaking. For the meantime, I have closed off the supply to the cold side by using a screwdriver to...
  8. C

    Removal of supporting wall from tenement flat

    Removed.
Back
Top