Search results

my problem seems to be with the integral RF boiler control , because when i press the sync button for 3 seconds the led light should flash allowing me to pair the thermostat , but the led light wont flash .

sorry i have tried posting pics , but my phone is not showing any files

Hi , i have a Salus ST620WBC fitted to my worcester greenstar compact combi boiler , everything was working well untill i had to replace the 2 AA batteries , i have paired it & i can manually turn up the temp & even the wee flame shows up in the screen but the heating won't come on , if i can't...

I really would prefer oven & hob to be switched off at the cooker unit. in case my grand kids were to turn a control on the hob I'm thinking of taking a spur with a 2.5 cable from back of cooker control to a 13amp fused switch spur & simply connecting my 2.7k oven, how does that sound,

Most people are happy to set the oven time & leave it on , but I prefer to switch it off at the socket unit when not in use, so could I use a 45 switch to control the oven seperate from the hob, is this my best option,

Hi all , in my kitchen i have a 45amp socket control unit TO a 45amp dual appliance/cooker outlet plate supplying power to the under built in single oven & hob , i had to replace the faulty oven , the new oven came with a plug which i cut off to fit the cable to the cooker outlet plate ,but...

Electrician said the consumer unit wouldn't take a rcbo, not enough space at the top, so he fitted a seperate shower consumer unit,

Eicr done today, water mains bonding tested All is well .

Had a electrician round today for a eicr test he said the 10mm cable to gas pipe is fine the 6mm cable to water main also fine as it is not a new install,

Cheers

I was trying to avoid using the 2 cables as it is difficult to feed them through , I seen something on the Internet where it said the 1 cable could be used as long as it wasn't cut,

Hi, when bonding water & gas copper pipes is it acceptable to only use one10mm cable to both pipes as long as there is not a break in the cable, so cable is continuous to both pipes

Thanks guys, I've decided to get a new C.U. Thanks all for your input

Sorry, I was referring to the wylex 2 way RCD metal box for my question about 6mm cable size

Is this suitable with the 6mm cable which is fitted to the c.u.

Hi , does anyone know if there is a r c b o suitable for a shower that would fit into a MERLIN GERIN MGPK12 , SEE PHOTO

don't know what else it can be ,i'm going to get the C.U. inspected & tested soon ,i'll leave the spark to check if that is the water mains bonding cable thanks

Think iv'e found it there is a earth cable coming down the back of the wall just above the C.U. see photo

Hi , i have a bonding strap just below my mains water tap where it comes in under the kitchen sink ( the other end of the earth disappears behind the wall , so i can't tell if it is connected to anything) ,but when i look at my mains earth just below my consumer unit i can only see the heavier...