Search results

my zanussi model zfk61/27ral is forming a large ice chunk on the inner rear wall of the fridge. i am told it is the compressor unit. could anyone help me by confirming this and if this is the fault tell me is it an easy job to carry out the repair thanks to all jimcas

Have outside toilet which is unused and have found a water leak in the cystern refill pipe below stop tap cannot find a mains stop cock so unable to turn of water supply, is there any way of capping or fitting a compression joint with the water running or anyone advise on other methods many...

have got bearing noise when machine is on spin cycle. can there be any way to grease it or if it needs replacing can anyone give me information on how to do it cheers jimcas

have an outside toilet that has not been used for years. pipework is leaking slowly at the shut off tap.can not find any mains water cut off outside to shut the water off anybody got any ideas thanks Jim

is there anyway that i can upload photos from a samsung steel mobile phone to my picture folder on my computer have tried with connection lead but not having any luck

when cold will not change out of 1st gear unless put in manual mode then after 4 or 5 miles when warmed up goes through all gears normally in any mode one repairer tells me it is pressure regulator another tells me it is fluid pressure valve. is there a difference and can anyone advise me on the...

machine would not complete wash cycle and water would not heat up the code was 3 flashes have fitted new heater element and now water is heating but dial is just going round and water seems to be on constant drain mode also am still getting 3 flashes for code would appreciate any help with this

kids decided to polish the screen with furniture polish now have large circles all over screen would appreciate any ideas on anything that might remove them

fridge icing up on back wall could this be thermostat problem? and are they easy to repair/replace thanks

When cold will not change up from 1st gear in drive mode but will will change up in manual mode.After about 4miles flick switch into drive mode and everything is normal Have changed fluid and filter checked all linkages but no different any help appreciated