Search results

Got Normal TRV4 radiator valves but wondering if the auto balancing are worth a change to? I've not got system balanced Or better just keeping the normal TRV4 and balance the system? Also, do they fit onto the body of the TRV4 body or is it a complete valve change?

I have the above room stat but it doesn't show anything on the digital screen until the programmer tells the boiler to turn on. Is this meant to have a live feed for display power all the time? It's a Drayton L711 1 channel programmer is it makes any difference

Thinking about installing a magnetic filter to my heating system in the summer and wondering what's the most recommended for fitting on here? CD37i combi boiler. Seen the Fernox omega, Trappex centramag genesis & spirotrap mb3

Just wondering if there's a set distance away from the boiler to stop the foam pipe lagging?

Starting to look at rainfall showers for when i do up the bathroom. Looking at the Mira miniluxe diverter erd. But wondering what wall would be better for fitting it to? Fitting it on the short wall at 700 or 800 wide or the ling wall at 1100 or 1200 wide? (still not 100% decided on the tray...

When using the hot water there's times when you turn the hot tap on and the hot water is noticeably cooler than normal. Then you can use the hot water tap again 5 minutes later and it's back to normal. Boiler is a Greenstar 37CDi

Just papered my hall, drained the radiator and rehung after papering, just wondering if there's a rough drying time before I get use of the radiator. didn't want to crank the heating on and the paper shrinks

Are the screwed on TRV heads all compatible with each other for when you want to change heads

My brother has just bought an old IM350 from ebay, there's a problem with loading the nails, you have to fiddle about with the butting to allow the nails into the magazine, just just annoying. Anyone else had this problem?

Just moved house and we're not using the dishwasher as much, was thinking about cutting down the waste of the dishwasher and fitting the mcalpine connector & jubilee clip just so it doesn't get a chance to dry out (kitchen does get hot due the the size of the windows, was 32c last week) is the...

just got new patio doors fitted, just wondering if there's any security bars available that you can lock onto the handles that you can leave your door open say 4" The handles are like these

Hi, Got a triton T80si shower last january from tritons ebay clearance store. On setting 2 the temp is going hot them cold, but if you have it on setting 1 the shower is fine & temp stays the same. Any idea on how it would do this on setting 2?

Any idea where i could get latches to replace these? The ones i've seen that may be ok have the leading slope on the bolt the wrong way from what i have

Just got 2 vertical radiators, just seen the fixing brackets and both holes are quite close together, it's to go onto a plastered dry wall, any other fixings suitable for this? each box says they're 60kg I will try to find a stud first so i at least get 1 top bracket securely fixed, but...

I'm going to be moving into my late parents house in the next few months. was looking to change some radiators but when under the floor i've noticed what looks to be the main flow pipe looping around the house and it has tees coming off to go to the radiators. Should this not all come from a...

I bled the radiators the other day, then topped up the boiler pressure, i turned off the valve at the mark on the gauge, but it ended up going to just under the 2bar after being used for a few days i checked the pressure again when the boiler was off, the pressure was down to 1bar and when the...

My mums shower grate chrome has lifted and can be a bit sharp. Can the whole top section be replaced?

My mums house has still got the old fuse wire fuses, was looking to get the Wylex push-in MCBs on the fuses it has 30a 5a 45a on the Wylex mcbs i've seen, they have 6a, 32a and i can only see 40a ones not 45a is it ok to change them out? will the Wylex mcbs fit a Memera board?

Do you still get the thin wire for lagging pipes? After 30 years, I've just went and lost my string line! and like many joiners they got a spool from the plumber as these were near indestructible and the perfect size.

The collar on an old Giacomini TRV has broken Do i need to replace it with another Giacomini TRV or will any TRV with the push down collar fit?