Search results

I am just wondering if I can somehow pull this van door dent back into place. Doesnt need to be perfect just looks like I could get under neath with a crow bar or perhaps bang from inside? Like I said not bothered about perfect just want to improve

My friend has tried installing a new light and has removed the ceiling rose without taking picture of the wires. I am going to have a look for him tomorrow but hes sent me a picture of his worrying attempt which as you can tell with arrangement has tripped his circuit. I have attached picture if...

As in title i have replaced van door (vauxhall vivaro) not sure how to connect central locking port. I have bolted the new door on but the wires came out of the port which connects back into the van to connect the central locking & speaker, not quite sure what wire to put there at theres about...

Hi, I took a picture of how a light switch was wired before i removed from conduit and chased wires into wall. Now I have lost my phone with the pictures! it is a 6 way light switch which i belive only controls 3/4 lights. I have the following wires - Single red core x 2, single...

Hello, I am converting the back part of my garage into a snooker room, partitioning it off etc.. Currently the lighting in there was tube lighting with ballast etc (pictured) So i have removed 2 of the tube lights, the first 1 in the line of 3 i have uploaded how the connector block was...

im baffled at to how to wire this switch, iv attatched as may photos as posible hopefully someone can point me in the right direction... there a 2 hallway lights which are controlled by 2 seperate switches 1 on a 3 gang a 1 on 1 gang. there is 1 hallway light controlled by 1 switch on...

had a gas fire fitted and the gas fitter mentioned he cant sign off the fire because the pressure is to low (its 17 should be 20, 19 minimum) hes saying it could be due to them using a long stretch of 8mm rather than 15mm to get to the fire and suggested that using some 28mm from the meter...

Hi, I am currently in the process of changing all light switches and socket and have decided to change a 3 gang 2 way switch to 2 gang 2 way switch (hallway has 2 lights which were previously controlled by two seperate switch on the 3 gang but i want to connect these into the same terminal so...

hi, i was wondering if it is possible to flag a small area 16ft x 12ft using 2x2 concrete flags without using a hardcore base, the bed consists of stones/mud/clay, seems pretty firm lots of stones and gravel in it. so would it be possible to just lay a 10:1 sand/cement mix over the bed and...

hi, im running a spur up into the loft of a upstairs socket. pretty confident in doing all the connections but just to clarify. connect 2.5mm cable into l/n/e in the socket on the ring mainand the connect the new socket same wherever desired. (not tested the socket but two wires going into...

hi i recently went to put a ceiling light/fan up in the master bedroom, the ceiling rose has 2 grey wires. into the ceiling rose there are - 4 brown 2 blue 3 earth do i just connect all the brown into the live slot on fan and the 2 blue into neutral, 3 earth to the earth etc...

Hi, Ive moved into a brand new house (new build) and recently converted my attic into my sons gaming room, in there we have new 800l marine fish tank with heating fish tank, a high spec gaming console, a electric heater and some other small lights lamps etc , its ok with the tank and computer...