Search results

  1. T

    Faulty underfloor heating thermostat????????

    have had the ufh now for some time but rarely use it. Turned it on today but it did not heat up. I have power the the Matt and thermostat. Resistance is fine on the Matt, thermostats which is a vitrex Fwc300 come on and performs all functions but when it is on manual mode the small symbol...
  2. T

    1 gang light switch with a dimmer AND a switch

    i need to install a light switch that controls 2 sets of lights. the first set needs to be dimmable and the second set needs to be on/off. i have found the below but am i correct in thinking this will work? my only concern is does the switch control the power to the dimmer? ie you set the...
  3. T

    Extra long 90 degree pan connector with 90mm outlet

    As the title suggests, does anyone know where you can buy and extra long 90 degree pan connector that has a 90mm outlet. the soil pipe is located about 10cm below ground level and so a standard 90 degree is not long enough. googled but all i can find is 110mm outlet ones.
  4. T

    Blue Handled 15mm Gate valves

    As the title suggest, making a bespoke tap for someone and need to get my hands on a blue and red handled gate valve. Red is no issue but i cannot find any blue handled ones anywhere. any ideas anyone !!!
  5. T

    Building the level on concrete floor for solid oak parquet

    right here is the issue i have a solid concrete floor in a 1960's property. This floor is to be covered in solid oak parquet but i need to bring the height up by about 10-12 mm so that the floor level when the parquet is down will match the height of the floor in the kitchen. whats the...
  6. T

    damp coming from under slate hearth

    ok here is the issue we had a wood burning stove fitted a while back and the guy installing removed the old concrete heath and replaced with a slate hearth. after having the stove fitted the entire room was plastered. around the fire place opening the plaster just did not dry out. so we...
  7. T

    damp coming from under slate heath

    ok here is the issue we had a wood burning stove fitted a while back and the guy installing removed the old concrete heath and replaced with a slate heath. after having the stove fitted the entire room was plastered. around the fire place opening the plaster just did not dry out. so we...
  8. T

    reducing the pressure for a bathroom mixer tap

    ok here is the issue had a new bathroom fitted and the basin has a bristan mixer tap. the tap works fine but when the tap is opened fully the water hits the basin and splatters everywhere. Is there a way to restrict the flow/pressure to the tap so that this does not happen? being heavy...
  9. T

    What protection do pipes need if routed beneath plaster

    Hi i am currently doing my bathroom and i need to have the pipes for the towel rail and the shower to be hidden in the wall so that i can then plaster over them. my question is, what do i need to protect the pipes so they don't cause the plaster to crack when the expand and contract...
  10. T

    Greenbrook timer T40s

    Hi i have a greenbrook timer T40s but cannot get it to work it needs to power an outside light. instrutions are terrible!! all i need to know is where and how to connect the wires coming in to the unit and then the wires going out of the unit to the light. there are 3...
  11. T

    wiring for lights connected to timer and photocell

    hi im looking to run 3 bulkhead lights outside which i want connected to a photocell. however i dont want the lights to remain on all through the night so want to add a timer to the circuit. i could just use the timer but this would need constant adjustments when the nights start to get...
Back
Top