Search results

  1. S

    Lightsys Outputs

    Hi, I post here a few years ago about connecting a nova guard sounder to my alarm system. It’s been working well for years. Believe it uses UO for activating the sounder. (as follows) Diagram: Nova: Lightsys: Bell Trigger S- U01 NO Strobe Trigger STR-...
  2. S

    Lightsys & RISCO Cloud

    Hi guys. hope someone can point me in the right direction. I have a working lightsys with a GSM module, its been working great. Set / unset + alerts at activation etc have all worked well.:) Recently added an IP module.. Connected it to the network. I can see its mac address connected to the...
  3. S

    Neutral for WiFi Switch

    hi all, Live in a new build and it has 3 wires for the lights, so have been able to add a few wifi switches. as the Neutral has been present. :) Fitting one tonight to the garage lights, these were added by a local electrician shortly after the build. There is no neutral present on this light...
  4. S

    Lightsys & ELMDENE INT500

    Hi, Over the weekend we noticed the alarm didn't seem to be working. Turned out its working fine, but the internal sounder, (a Elmdene INT500) is not working.. If we arm the system it used to emit a squark, same on disarming.. Not it just emits a very small clicking noise.. I removed the...
  5. S

    Is there a better way? - 2 or 4 Channel Light controller

    Anyone know a better way to do this.. I have the following set up in my kitchen either side of the hob and extractor: Left: 1 x Cupboard Spot (12V DC LED, 2W), and 1 x Cupboard Strip (12V DC LED 15W) Right: 1 x Cupboard Spot (12V DC LED, 2W), and 1 x Cupboard Strip (12V DC LED 15W) On both...
  6. S

    SMS from Risco Lightsys Alarm

    hi, I have a Lightsys alarm fitted and all works well. Recently I fitted the GSM module to the alarm.. I defined 2 FM numbers, and the event on which I which i want to be notified.. All worked well: I could set, unset, and check the status via SMS On ARM I would get a message. (just for...
  7. S

    Decorative water channel

    Hi Guys, In a few weeks we are about to start on the garden, we are looking to install something similar to the link below: https://s-media-cache-ak0.pinimg.com/originals/35/af/1b/35af1b083a44d7f017f992570c037733.jpg It will run across a section of the lawn, and will be about 4m in length...
  8. S

    Underfloor heating mat and bathroom isolation

    Hi guys, Having some work done in the bathroom. When finished the installer will have fitted a small heating mat under the new bathroom floor (<300W). I have a few questions about connecting it up. Previously the bathroom had a 6mm cable running from a wylex fuse box (with MCB type fuses), to...
  9. S

    Lightsys connections to Novagard 6

    Hi all, After some help with the connections from a lightsys to a Novaguad bell.. I assume that the lightsys is not a NovActive compatible system? And that I will need to make the connections via standard wiring.. I set the DIP switches to set the box up as a SCB. I made the connections as...
  10. S

    Lightsys Reset to defaults

    Hi All, Moved in a new home. House has a Risco Lightsys alarm installed, but with no external bell and missing a couple of sensors. I have purchased these and have gone to fit them. I'm wanting to set the alarm back to defaults. I looked up in the manual how to reset the "defaults". Setting...
  11. S

    Pyronix MEQ Blue Quad PIR Detector with Risco LightSYS2

    Hi all, Is it possible to use the Pyronix MEQ Blue Quad PIR Detector with a LightSYS2 alarm. The LightSYS supports wired sensors, but is lacking any connections for tamper. So being an armature at this it looks to me like I should use Double End of Line resistors so the LightSYS can see the...
  12. S

    Eurosec CPX control panel with 595

    Sorry if this has been asked before... New house, New alarm but looking for details on it.. Understand that this is a wireless alarm, and from what I can see there are 6 wireless zones, the door contacts are wired. There is also single wired control panel.. My question is, is this alarm...
  13. S

    Will a 45cm dishwasher fit here?

    Just buying a new house, want to fit a Dishwasher, managed to grab a few pics on a walk around.. (Power, water, drain are all just out of the pic to the right of the second pic.) There is a unit around 90cm wide.. With 2 x 45cm doors opening out from the centre. Here you can see the left side...
  14. S

    honeywell v4073a only moving one way??

    Hi all, After a bit of help, this is not my area! Came home today to found the house was cold. After some testing found it was the Honeywell v4073a Motorised Valve. (3 pot) Was going to replace it, but after some testing not 100% sure its at fault, or suspect its gone in a strange way...
  15. S

    Replacing a Grasslin T2002

    Hi, Im sure this has been asked many time before, but I just want to be sure before i start.. I want to replace a very old grasslin T2002 on a what I belive is a fully pumped system with a 3 port valve. My quesiton is around the connections in the current timer.. Currently there are...
Back
Top