Search results

Smash the pipe with a hammer, wear goggles, the fact that the back of the pipe is against the wall should stop it breaking the clay

If you have a clay pot lined chimney then you dont need a liner, fit a sump adaptor to that and then your vitreous to that

Why dont you fit a sump adaptor and sweep through the stove?

as said lose the low limit stat, unless you are on gravity hw then it wont work very well

Jamf

Common problem i know whats wrong, get someone thats used to working on fires to have a look at it. Till then its best not to use the fire.

you need to remove or get someone to remove your gas liner (and the gas cowl that it should have on top) before using it as an open fire.

syphon it with a hose pipe

3/4 x2 = 1.5 5.5-1.5= ....

Baxi solo he

you need to take the lid off the cistern and take a photo of what you see in there...

The aqualisa digital and digital pumped showers look very similar, i reckon the engineer thought it was a pumped one when its not.

4450 braziery last week

try noise reducer, take it you have gravity hot water, hence the kettling, pumping hw side may help

blocked condense trap

you need a new one

its the splash filter

Its £117 plus vat from akgas. £205 all in for a new valve isnt a bad price at all. Dont like it, then DIY...

Last time i bought a diverter for an ace high it was the best part of £150 and they arent the easiest to fit

Might just get away with bending the arm on the ball valve, also he should be able to work out which valve does what from looking at the pipework. Lastly a stopcock can often be freed off, did the guy try to free it by hand and then give up?