Search results

Any one know how i get the small triangular trim of the inside of the door to remove the wingmirror body . I had a little tug at it but its ether well clipped in or screwed down somwhere . Thanks

I know mate do it all the time

That will do nicely sir . 8)

There are calcs based on the kg output noted on the side of the nozzle . Each nozzle size passes a certain amount of kg of oil per hr . So if I don't have the correct size nozzle for the burner rated at 30 kW I can fit a smaller one & wind up the pressure to make up for smaller kg per hr rating...

Cheers agile , I've spoken to burnerman on here before about oil matters, I also read the link you kindly provided . just wanted a opinion from them that do it day in day out . I do oil agile but wanted to cut out the calcs & other crap & play it more by ear etc

Basic question on nozzles . If you only have a nozzle that's either smaller or larger than the exact one yoy require what's the correct procedure regarding adjusting the pump pressure to accommodate the different nozzle, as in do you do any calculations to work out the kg through the nozzle to...

get someone on to clean it , the soot these things can produce & the mess that can occur during cleaning is ridiculous .

Stay away from it if its the same heat engine as the issar \icos . Utter garbage .Pay more & get a better boiler , both vailant & baxi do the flue gas recovery units or whatever they're called & are far better boilers

:oops: forgot about that

no its not gas related

Check you have voltage going into the boiler & across the on off switch, transformer could be suspect