Search results

Afternoon, I am after a bit of advice on how to go about moving my toilet waste and then reconnecting up the basin/bath waste. The current setup consists of basin and bath waste going through the external wall that leads into the kitchen extension roof void and then out of the side into the...

So I've recently created an ensuite in a bedroom. Connected up to soil pipe, connected up to water using a JG connector and all was well. I then removed the toilet and set about plasterboarding the walls up and run ing the pipe work within the wall coming out near the top of the soil pipe...

Afternoon, Currently all our radiators are supplied with old style gray plastic 15mm pipe until where they come up from the floor is copper. I am wanting to at least replace the valves and use chrome pipe (not radsnaps, i don't really rate them) in place of the copper. Could any one...

Installing a new connection into the soil pipe in the next week or so. I know the fall is around 18mm / 25mm or around for 1m of pipe externally. The exit hole will be pretty close to where the soil pipe is as its the new toilet will be pretty much in the same place as the current toilet just...

Currently renovating a room and want to change the banister that is along the top. There are two posts currently there that are deep into the structure of the stairs. These need to come out so i can replace with proper spindles. Is it as simple as cutting the current posts level with the...

So there is a room already in the attic that is currently on its way to being made bigger by extending it into the unused eaves of the house so make use of them. Everything should be going to plan however there is one support there that is in the way. I could box around it somehow and close...

So in the loft now is a used bedroom, the roof is not insulated at all, the plasterboard to the roof behind it is slate, no felt or anything. In the room is also a partition wall leading to empty 'roof' space that is used for storage. This wall is going to come out and floor boards laid and rest...

So the current attic room in the house could easily be made bigger by taking down the two false walls at either side and extending into the eaves that are currently used for storage. The space in there is quite large and would benefit the room great. Its not much work really, just plaster board...

The house is very old and has an average size attic bedroom. In this attic room there are two crawl/storage spaces at either side, both of them quite a size inside. Obviously in this the roof begins to lower but its still a large space thats unused. There is nothing in these spaces, two...

We had an old mixer shower that was probably 20 years old and it finally gave up on us with a thread breaking down so it wouldn't turn off. After looking around in shops / internet and ebay i came up with what i thought was a solution to get a new one in place with the current set up that...

Hello everyone. We currently have a very old mixer shower in our bathroom that has been running fine for some time now. Yesterday it decided it didn't want to turn off. I took it apart and can see that its the part called 'plunger plate' but the parts for these showers are now not...

Hi all. We currently have a Triton T70XR electric shower. In the last week the shower has become faulty. The shower will run fine for around a minute to where it then cuts off the water and stays off. The power light stays on and water will start flowing around a minute after. When the...

Does anyone have a wiring diagram for the Honeywell CM67 wired thermostat. I took it off the wall to hang a little while plaster work was getting done and when removing it one of the wires came out (note, there are only two) I didn't notice which hole it came from but there are only two...