Search results

Hi Guys, Having issue with dual Tec installed in a conservatory microwave seems to be constantly in alarm condition, so basically its just functioning as a PIR at the moment and due to the heat constantly alarming customer not too happy, I have emailed Honeywell technical support but that...

Hi All, Hope somebody can help, i have a digi and i am looking at connecting up some external PIRs on there own panel and that panel trigger a spare input on the existing Digi so i can look at my CCTV. The existing digi is powered of the existing alarm so i will probably have problems...

Hi guys, Usually if I put a dialler in I connect to panels power supply but in manual it says if the communicator is powered from an external source and the outputs are being used without relays the panel and external powersupply will require a common negative supply rail What do you have...

Hi Guys, I currently have YCams and i would like to use the FTP to upload stills when motion detected. However i have never tried this before so just wanting some help. Does it save it to a computer in the house or does it save it to a FTP Service ie Externally Off Site ? Does...

Hi Can you guys recommend a Good PET Pir for a Dog looking at a Medium Beagle size dog staying in Kitchen Only I have used Active8 PIRs for Cats & had no problems. There is selectable wights 15kg & 25kg on the Active8 Has anyone used Visonic K980 that goes up to 36kg but never used...

Hi Guys, Just wondering can you connect a 12 volt buzzer to the speaker terminals of a control panel & would it give entry/exit & alarm tones :?: Thanks

Hi guys, I need to connect a dialler it can be programmed pos or neg start, however there are no communicator outputs & the bell is a scb connected to the + - terminals in the panel. How would I connect to the dialler ? Does it need a relay ? Cheers. :wink:

Hi Guys, The other day we had electrical work in the area so they disconnected the power for around 8 hours. The alarm back up battery worked ok untill it died then the SAB kicked in outside Power come back on & i silenced with my code. However the engineer code which was set to default...

Hello, I have a digicom connected to a accenta G4 mini via the communicator outputs When the alarm first triggers it sends a channel 3 like normal, however after the bell time of 3 minutes the systems rearms, I then triggered another detector but it doesn't re trigger the digi this is beacuse...

Hello, I have defalted the panel back to manufacturers settings as in the engineer manual. User code 1234 works ok, However when i try to access engineering menu & type the default engineer code i get wrong code try again. Is it possible for the previous installer to burn in there code in...

Hi guys I have added a phone line extension, and moved my router & phone The phone & digicom are filtered, When i dial out on my phone and hang up everything is ok, However when the digital communicator dials out it sends its data as normal but when it hangs up after communication my broadband...

Hello, I am wondering is it ok to wire a socket from inside an existing fuse spur that powers my intruder alarm, Would only be running a router of it & possibly a lamp, Was going to wire in consumer unit but getting a bit tight on space. Thanks in advance :D