Search results

  1. sparkydave in wales

    Peugeot boxer electrics

    I have a 2008 Peugeot Boxer 2.2, found there is a 2.5-3amp current draw on the diesel pre heater unit fuse (50amp) when the ignition is off, which is accompanied by a very low level whirring sound from the bulkhead area near to the ECU, Any ideas? removed the fuse to stop it flattening the...
  2. sparkydave in wales

    base for plastic shed

    We've been given a plastic 8x8 shed with integral floor, does anyone know what sort of support these floors need?? I have a timber frame (4x2) on four posts with timbers at 2'centres, not sure whether I need to put more timbers in, or just put ply down first to spread the loading
  3. sparkydave in wales

    Cavity wall ventilation

    A friend lives in a house that has a block built extension, the extension was built in the mid 70s, with cavity walls, she is getting some damp/condensation at the top of the walls inside, what I have noticed is that there is no ventilation into the cavity or loft, would adding vents towards the...
  4. sparkydave in wales

    flex used on socket circuit EICR code

    what code for flex used to wire 15amp radial on EICR?, got a CU change to do later in the year and found a radial wired in flex
  5. sparkydave in wales

    trend TE5 router issue

    Has anyone got any idea why a TE5 should cut out intermittently? not under any great load, I'm thinking it could be a faulty thermal cut out or something to do with the speed control, anyone had the same problem and managed to sort it out?
  6. sparkydave in wales

    german kitchen door hinges

    I am carrying out modifications to a Poggenpohl kitchen, the cabinet hinges appear to have some hidden screw system to fasten them onto the cabinet, once you take the door off, there are what looks like two threaded pins but no means of turning them, I need to take them off, any ideas??
  7. sparkydave in wales

    efficiency of vented as opposed to closed system?

    Can anyone tell me the difference in efficiency between a closed system and vented, ours is vented at the moment and I'm considering whether it's worth altering it to sealed system (expansion vessel, prv and filling loop with guage)
  8. sparkydave in wales

    Thermacon 90/120 cuts out

    Can anyone give us a bit of advice, a friend has a Thermacon 90/120 which cuts out after being run for 30 seconds, the plumbing (water) side of things I understand, along with the electrical side, not looked at it myself yet as it's not local to me, but is there anything obvious I need to be...
Back
Top