Hi, I would like to double check if the connection that I have done is ok. Please have a look at the images below. My concern is the diagram have to earth cable going out, which I don’t understand. Would appreciate if someone could advise.
Hi,
I hope some can help me if my issues.
I got a 50yrs old oven socket and would like to swap it. As show on the pictures you might be able to see the cable. I would like to know can I swap it with...
Hi Guys,
I couldn't find any product out there (specifically for laminate flooring) that i could use to waterproof my laminate flooring.
Is there anyone know what would be best product to use to waterproof/seal my laminate flooring? Could you send me a link or name or product best for this...
Hiya,
I used the straight coupler to joint an old pipe which is slightly small than the new one (22mm) ♂️. It has a slight leak on it. Is there any way that I could seal it without drain the system again and soldering it?
Hiya,
I've added a link below of the leaking toilet. I need some good advice how can I fix it.
Should I just replace the whole thing or it could be repair?
If to replace it, what sore of flush outlet should i purchase?
Many Thanks,
Hiya,
I would like to lay an Indian Sandstone patio on my garden. I seen some patios that were lay without mortar/cement. What is better? With or without? And what the advantages and disadvantages?
Really appreciate some advise from those who experience.
Thanks,
Hiya,
I would like to lay patio in my garden, however the area that I would like to cover has this thing called 'Inspection Chamber' as picture below. Would really appreciate any advise.
Thanks
Hiya,
I got Zanussi fridge freezer model Z563/W.
The sound of compressor never stop, the fridge is not cold and the freezer is working but it seem to produce much ice in the freezer.
I have tried to defrost it but still the same.
Should i refill the gas?
Thanks,
Hiya,
Need advise regarding sealing the splashback edges. I noticed that the gaps between the splashback and cabinets (the hub as well) is about 3-5mm, should I seal it?
Thanks
Hiya,
I've used this power drill a couple of times and just realised that the chuck spring in and out. Anyone knows is it faulty or normal?
You may take look at the clips below, which I uploaded for reference.
Thanks
Hiya,
I've drill 6m hole on a plasterboard and plug it in with
(https://www.screwfix.com/p/fischer-plasterboard-plug-ldf-6-x-100-pack/81956)
However, it comes out once i put up the curtain.
Any idea what would be a good plug for plasterboard to hold heavy curtain?
Thanks,
Hiya,
As the picture below, I would really appreciate if anyone could advise me on, how should i finish up this part which has gaps in between? Should paint the frame first?
Hiya,
My HW (hot water) not working after I drained my CH (Central Heating).
I released all the air pressure in all radiators.
When I set the control to just HW, I can see the fire start for a couple of minutes and then it went off.
Any idea why?
Should I bleed the myson unit five pump? Is...
Hi All,
I would appreciate if anyone could advise me on what sort of filler would be the best to fill up those gaps between the stairs?
Btw, I plan to strip off the paint and stain it.
.
Hiya,
I would like to change my taps (doesn't have isolation valve) and would like to know if anyone knows how or can I isolate the system (Santon Premier Plus) by not drain all the hot water in the tank?
Thanks,
Hiya,
I am going to re-roof my roof by using fiberglass. I got most of the stuff needed. However, I notice that they use acetone to clean the trim before applying the resins. Can I skip this part or is there any alternative?
Thanks,