Search results

Got lots of cleaning stuff for carpets, limescale etc etc. Three years of stuff thrown in cupboard. If I have two of the same stuff do in just pour down a drain then rinse and recycle? Tons of rags too

Just checking my tying a ladder is OK. I found that in both cases the top slides a bit left to right. One is on a wall going onto roof and one on a tower

Used this masking tape but still get bits coming through and it's not a straight line. What am I doing wrong? The line I am trying to cut in is in a groove. Anyway to improve what I've already done?

I personally wouldn't care and I didn't put a dust sheet up on them as I thought it might make surface slippier r but people are different. Some people get offended I guess. Should I sand it out and put a sheet over for rest of work? Using them at too of tower

I need to put this tower together. The wheels have a thread, where do I screw them into? The bits of scaffold just seem to hollow bits. Any tips on assembling all this?

Is it worth getting the Stihl Pruning saw? Think it's about £200. Wondered how useful it is https://www.frjonesandson.co.uk/products/stihl-km-ht-pole-pruner-attachment-12-bar/?gclid=Cj0KCQjwxvbdBRC0ARIsAKmec9bcqLZwACQNPLukrBlkhts_B7h7i7e4iMunqRd4-R7evneIWLFZndIaAmwPEALw_wcB

Been cutting a gum tree down with saw on extension pole and bark seems to rip down the side. How do you get a nice clean cut? Separate question, is there any technique in cutting a tree or bringing the height down. I've just been cutting to a certain height.

If I hedge cut this all the little conifer bits go on beds. How do I prevent this? With other plants I usually blow it onto grass then scoop up then mow. Conifers don't blow too well

What's the best way to get this g into the ground? Sorry it's not a peg but a thing which pike goes into. It's going to hold a spinning washing line. Think the ground is stoney a few inches down. Lump hammer and wood?

Got lots of leaves and sand off block paving which was pressure washed. Figured it could block drain if left? Is it best to regularly clean out?

Had really thick laurel. And it was getting on for 2 or 3 inches thick the lower u get. How do u bring this kind of hedge down? Pole pruner attachment on my multi tool?

Is it relatively easy to take out the first tile on the roof so I can tie ladder to roof baton? A roofer friend said that's the safest thing u can do for a ladder.

I heard there was something you can buy which hooks over the ridge of roof which you attach your harness too when on a ladder working but can't find one, anyone heard of this?

Need to paint the fascias on this. Was going to try a ladder with standoff in the middle, possibly use scraper off pole. On the right the wood work is set back so best to use roofing ladder or but my ladder to vans wheel?

When I turn on the toaster it suddenly switches off. Went to electric box and pushed the lever back. Sorry no nothing about electrics. What's wrong? The oven next to toaster doesn't turn on. The clock's working and hob but not main part

I heard you can get the bushcutter attachment for Stihl multi tool then for just another £30 get strimmer as well which fits on bushcutter. Good kit? I definitely need new strimmer as Ryobi engine is popping. I also have a load of brambles I need to clear. Is the bushcutter attachment what...

Used a limescale remover to unblock shower head used gloves and goggles then squitted the head in a little takeaway dish. Then spilt some on concrete floor and it started fizzing. Quickly threw a bucket of water over it and it stopped. What's the best way to do this? Just generally with...

If I get the Stihl multi tool with extension and hedge cuter is that the longest hedgcutter I will get? Lots of people asking for high things to be cut? Are there any really high poles?

At the moment I've just got a piece of wood gaffer taped over the switch to stop three yr old playing with switch and throwing stuff out of window. He can pull tape off. Any better idea? I can control window myside