Search results

  1. H

    Garden wall removal.

    Morning all. I am in the prcoess of purchasing a property that fronts a 20mph reidential road. Currently there isnt a driveway but a very obvious solution to remove the garden wall to allow me to park on (what is currently) my garden. I'e tried calling my local planning which just rings out...
  2. H

    Samsung American fridge tripping RCD

    Hi guys , As the title suggests my 4 yr old Samsung fridge trips the RCD. Currys 'know how' came out to it and left saying it wasn't fixable. His diagnosis was that there was a fault on the wiring to the defrost heater or compressor which was short circuiting to earth. My daughter who was here...
  3. H

    1.3 CDTi / 1.3 Multijet running issues

    Long post warning ! Hi folks, I took on a project in the full knowledge that the vehicle didn't run properly , so only have myself to blame! Vehicle - Fiat Panda 1.3 multijet diesel 2010, 100k mileage, full service history. Issue - vehicle struggles to start and when it does it cuts out...
  4. H

    Floplast solvent to 32mm/40mm compression

    Hi, I've got a waste solvent waste pipe that I need to connect to 40mm or 32mm compression fittings and pipe. I'm not sure of the outer diameter, i think its around 34mm. At one end of the pipe run it connects to a connector on the toilet waste with 'S8M' stamped on it, which a bit of googling...
  5. H

    Cambelt Timing Question (2.5 Dci Master/Movano)

    Hey folks, I've got a 2.5 dci Master and it needs a cambelt. I've found one poor video in Portuguese on YouTube which isn't a great deal of help. I've read a few posts from people who have said you must use a locking tool. Is there any reason why I can't mark cam/crank cogs with tippex like...
  6. H

    Bathroom extraction

    Couldn't for the life of me work out the best place for this post , so here goes. For reasons I won't bore you with I can't put a bathroom extractor fan in my bathroom wall. So I have two choices. 1. Extractor in ceiling above shower and run approx 4.5 metres of corrugated extraction pipe...
Back
Top