Search results

  1. U

    Should I fix this now, or would waiting for summer be better - mould repair/efflorescence

    Hi all, I posted this thread in November about issues having redecorated by daughter's bedroom >>> Possible Efflorescence To summarise: ...lots of damp problems and black mould and flaking paint around window ...scraped it all back and removed all window frame sealant as it was mouldy and in...
  2. U

    Redecorated Bedroom - odd white furry mould near window spreading + more damp?

    Hi all, Having spent a lot of time and effort redecorating daughters bedroom and fixing (at least I thought I had), a damp issue, are things now getting worse? Highlighted area where damp, black mould and peeling paint used to be before decorating: Weird furry mould (?) where there was...
  3. U

    What are my options here - Replacing Shower Pump

    Hi all, Need to replace my shower pump but have run into a small issue: Pipes and fittings are very close to fitting. I can possibly try and get away with the two outlets as you see pictured (two at the rear, not push-fit connected yet), although it will be a little high. This leaves me with...
  4. U

    Why is fresh paint cracking like this?

    Hi, little background. Around daughter's window was a lot of mold and paint coming away from wall. Over the course of a few weeks: Cleaned off mold with thinned bleach Scraped the paint off, chipped away the loose (and maybe previously damp plaster). Some of this was coming away in 1" chips...
  5. U

    Boarding a Loft with Low Ceiling Height - Previously Boarded on Joists

    Hi all, Had a small leak in the roof last year and about a month ago I went into the loft and the whole roof was literally dripping with condensation. Now it has cleared I need to give the loft a proper do-over. Joists look to be around 100mm and insulation is throughout - some areas up to the...
  6. U

    Hairline Cracks, Larger Cracks, Damp Areas...some daylight to outside...

    Hi all, Daughters bedroom was decorated about 10 years ago as a new born, I had walls and ceiling re-plastered beforehand. Emptied the room, took down wall hangings and blinds and am finding lots of, what I hope are, relatively minor issues, but would like advice on the best way to resolving...
  7. U

    Large gap to fill behind kitchen up-stands

    Hi all, Not strictly tiling, but I think this question could go here best! Decorated our kitchen a couple of years ago, but when the guys who fitted the stone counter top fitted the up-stands, there was a large gap as the wall is quite out. I filled it 2+ years ago, I think with Soudal, and...
  8. U

    Pressure Reducing Valve on Filter Tap - Is this normal?

    Hi all, Hope someone can advise please? Just clearing out under the sink and happened to notice something which I wasn't previously aware of. We have a pressure reducing valve on out filter tap hardware set to 3 bar, as I believe the tap is only rated to 4 bar. While clearing out under the...
  9. U

    Nest Thermostat Set to 16.5c but Heating coming on at 17c/18c?

    Hi, usually Nest thermostat is set to around 19c, but with gas prices it is currently set to 16.5c But what I have recent today is that the heating is coming on before it drops to 16.5 Anyone know why this may be happening?
  10. U

    Rear Vent in Hisense Fridge Freezer has Frozen Solid

    Hi all, After a bit of advice. I have a Hisense Fridge Freezer, and while cleaning the long sliding drawer at the bottom of the fridge section (kind of like a chilled drinks drawer), I noticed some ice at the back of the drawer. Upon pulling the drawer out, looking at the back there are what...
  11. U

    Disappointed in Makita DJV180 Jigsaw - Am I Asking Too Much Of It?

    As i stated in a previous thread, I was looking to replace my Makita 4334D jigsaw. After some advice on here and lots of searching, I went for the DJV180. I am about to return down to a few issues, unless someone can advise how to resolve. First off, the blade does not align with the guide...
  12. U

    Jigsaw to Replace my Makita 4334D?

    Hi all, I've had this jigsaw a long time (bought second hand from a carboot sale about 10 years ago), and its done me ok as a DIYer. I'm trying to cut some straights and curves through scaffold boarding, and its difficult to get a perfect straight 'down' cut. The plates a bit bent, and I'm...
  13. U

    Is running direction of underlay important

    Hi all, Just had a massive quote for a living room carpet (with underlay and fitting), from a company, so will instead look to source underlay and carpet myself and get someone else in to fit it. Couple of underlay questions: 1. Although I'm sure full lengths of underlay are best, is it OK to...
  14. U

    Painting Skimmed Wall in Middle of Already Painted Wall - Changing Colour

    Hi all, Hope the title made sense! Basically, I have boxed in a fireplace in the middle of the wall and have skimmed it. See picture below: I am painting the whole wall in F&B Charlotte's Locks - which is a kind of flame orange. I've tested the paint on the exiting red (maybe Crown Period...
  15. U

    3rd Gen Nest - Hot Water only works when Central Heating is on

    Hi all, Took a few days to catch this as timings of household activities hid the problem. Having installed a Nest a week ago, I have now discovered that the H/W is only working when the heating comes on (it is on a schedule to be on all through the day but it just doesn't come on). 'Boost' on...
  16. U

    Nest H/W Control with Worcester Greenstar Ri Condensing Boiler - Settings Unclear

    @Mods - please delete, this thread not accurate to my issue
  17. U

    SANITY CHECK - Replacing Drayton LP522 & Honeywell BDR91 with Nest

    Hi all, Hope someone can sanity check something for me quickly please? I am in the process of replacing our existing wireless thermostat with a Nest. As per the diagram below, can someone confirm a couple of things for me please: 1. Removing the BDR91 from the system, I just connect Yellow...
  18. U

    Foil Wrapped Skirting (Can't get Pre-finished) - any good?

    Hi all, Am decorating the front room and want to match skirting in the adjoining room. I've always just used Wickes Pre-finished bullnose skirting. I've been monitoring their stock for about two weeks, of which the purchase always fails due to shipping slots, and they have now confirmed they...
  19. U

    Extending existing wall - what to do with join?

    Hi all, I currently have a TV mounted on a wall (the wall is the boxing in of a fireplace). I am getting a slightly wider TV so want to extend the wall by a few inches either side. As you can see in the pics, the current wall in finished, and I intend to build a small frame either side. Few...
  20. U

    What is the best configuration to add a these additional sockets?

    Hi all, Hope someone can advise as I think I have started to overthink this! I originally had a trailing extension lead plugged into the double socket which ran up a wall and into a cavity behind a wall mounted TV. Doing a small redecorating job I want to neaten this up but also hard wire in a...
Back
Top