Search results

I have a small repair to do on my kitchen floor, I used bal sandstone colour. I cannot find it anywhere local to me know and only online large bags. Anyone know a close match to this

I usually use no nonsense but i always seem to get cracks appear around plaster coving after time. Is this just a typical thing with caulk Would a glue or paintable silicone like ct1 be a better option

Anyone know if your suposed to use russ strip round the upstand of a rooflight. Theres very little info on russ strips. I used one on the upstand against my wall when i did the extension, even though i dont think it needed it as i think kts only for certain size sq meter roofs

On a flat roof, when sticking epdm to a upstand round a rooflight is it ok if the upstand is just treated timber , 6x2 for example, rather then boarding over the timber with osb

So as im building a flat roof with a rooflight in i know the glass must sit at a 3 degree fall. My question is, if the roof is aalready falling atleast 3 degrees does the rooflight need to have a additional 3 degrees on the upstand frame, or can my frame sit on the roof flat which would already...

Anyone know the lifespan of one which is out of the ground. Thinking of using one to hold up a flat roof pergola, oak prices are just increasing all the time in my area

So i have a patio area i would like to cover over. 3.7m x 4.6m The plan so far is Flat roof For a 4.7m length i will need 9x2 joists from what i gather So 9x2 wall plate bolter to external wall running 3.7m 10 9x2 joists will be hung off this spanning 4.7m These will attach to a 9x2 bearer...

Green oak or soft wood posts for flat roof canopy For a 3.7mx4.7m Flat roof with epdm 10 9x2 joists at 400 centres Also 2 skylight panes of glass Wall plate on house then 2 posts the other end sitting on piles and steel post bases Do i go 8x8 green oak or 8x8 pressure treated softwood. They...