Search results

Hi Guys I have another problem with the above again. HW i get the red light saying it is asking for hw but no hw CH no heat but seem to operate as should all clicks seem to be there pump seems to be spinning the what i presume is a gas actuator moves, no flame no ignition and no lock out...

Hi All I have the above combi old and rubbish i know Problem HW OK CH not working, I changed the wax capsule in the diverter a couple of years ago and that sorted my last problem, and this seemed similar until i started to look into it. The air vent at the top whilst not tightened down had...

Hi all Hope someone can help Firstly the problem The CH comes on for a few seconds then goes off and repeats at random intervals some of the rads upstairs get warm/hot but not the furthest away the downstairs cold no rads have been adjusted other than the normal temp adjustment so balancing...

I have a problem and that is what substance do I use to reattach the door to the hinges it looks like a rubbery type substance that glues the door to the hinge. Thanks in advance Dave

Hope its a simple one I live in an early 1900 terraced house the Living room and dinning room both have Gas fires fitted and the two bedrooms above have the fireplaces boarded off with no ventilation. I have double glazing and central heating. Is it advisable to fit ventilation to the blocked...

Just wondering what the variable resistor does on the board behind the dispaly panel it is little black control at the bottom of the board thanks in advance Dave

I am thinking of replacing my combi is there any boiler that is a direct swap for a potterton puma 100e apart from another one cheers Dave

Help please Firstly the c/h stopped working (pump is free) I noticed some of the relays were carbonised due to arcing so I cleaned them I also went through both boards and sorted out various dry joints mainly on the plug pins everything seemed fine so I powered up. now every time I...