Search results

Hi. The ponds at my mums house are leaking and I was going to try and clean out and re-seal over the summer. First: They are concrete with some sort of painted fibreglass (?) sealant. (which is leaking) This is at least 30 years old. Do I remove all this first or simply go over over it with a...

Two ponds in garden that are leaking badly. Think last time they were treated was around 15 years ago. they have some sort of green fibreglass/plastic coating (?) A couple of questions.... Do I need to strip this green covering off to the concrete below? What is best sort of...

I'd like to completely strip the victorian staircase in my house. I've done most of the actual stairs & sides however I'd like to do the bannister & spindles as well. It would make sense to me (?!) to have the spindles dipped & then replace them. has anyone got any experience of taking the...

After a bit of advice or comments on what I'm thinking of doing: Recently bought a large victorian terrace that hasn't been touched for a good few years. There's a sizeable draught coming up through the ground level floors. The house has a double cellar & a crawl space at the back end...

After a bit of advice or comments on what I'm thinking of doing: Recently bought a large victorian terrace that hasn't been touched for a good few years. There's a sizeable draught coming up through the ground level floors. The house has a double cellar & a crawl space at the back end...

Relatively new & little used washing machine is not draining. Everything works fine until it hits the draining part of the cycle & then just pauses with water in the drum & won't move on. I've cleaned out the filter. (nothing in there) Undone the pipe underneath, between the drum & the...

How much, roughly, I am looking at for getting a tradesman to fit a velux window? Window size is approx 1.8 X 0.78 meters. Situated in top floor landing. Surrounding area will need sorting as well as its the original victorian frame/window thats in at the moment & pretty much rotten...

Hi. I know I'm going to sound really stupid but...... I've borrowed a makita sds drill. The plug has 3 long circular prongs. What does this have to go into? I presume you can't just put a 13amp on it (?) But what do I need? some sort of convertor?

Hello all. Just sorting out my living room. I've opened up the fireplace & now I need to sort the walls. I stripped off all the woodchip to reveal two walls which (i think) are the original victorian plaster. (there is horsehair in it) The other two walls have been skimmed at some point in...

I noticed one of the floorboards was "bouncing" near the back door and pulled up the carpet to find the floor in a bit of a mess. The house is Victorian & been bodged here and there over the years. Started pulling up the floorboards and found the joists to be crumbling (more so towards the...

Can anyone recommend me builders in the manchester area. Only a smallish job. Victorian house, want to open up fireplace (which has been botched over the years) & need a lintel putting in, so basically restoring it to original & it will obviously need plastering over to finish the job.

Just starting on re-installing a victorian fireplace (will be a working fire) and started pulling plaster off. There was a gas fire fitted sometime in the 60's I guess. The original hole has been built up with breize blocks & I was expecting to find a lintel of some sort, or a brick arch, above...

I'm currently stripping down the wood from various parts of the house. Its victorian era pine; I'm wondering what is the best way to finish it off now that it is free of paint. Should I oil, wax or varnish? What are the pros & cons? Is one better than the other in terms of durability...