Search results

just wanted to ask does anyone know who makes the unvented cylinder that you can lay horizontal on a secure platform or if they do make them? im sure i remember seeing one on here before.

http://www.thesun.co.uk/sol/homepage/2792219/Gas-blast-destroys-town-centre-flats-in-Shrewsbury.html

hi just wanted to know if anyone has done it before and if you can use a powerflushing machine or would it be too powerful and instead recommend using a smaller descaler?

hi has anyone got a copy they can email me

anybody know roughly how much they cost?

has anyone else heard that there will be some ammendments to it from october 1st 2009.

just wanted to know if the cp1 is acceptable as evidence for the a.p.l folder. and also is the cp1 will be acceptable for a landlord? or does it have to be a cp12?

hi all, i have come across a slight problem, its an open vented system with a netaheat boiler, what happens is after the heating or hot water is turned off a little bit off water discharges into the f+e tank. this has happened after it has been powerflushed. I have replaced the tee pipework...

hi all, i have come across a slight problem, its an open vented system with a netaheat boiler, what happens is after the heating or hot water is turned off a little bit off water discharges into the f+e tank. this has happened after it has been powerflushed. I have replaced the tee pipework...

hi all, i wanted to know if anyone knows where i can buy the high temperature resistant (101 degrees +) plastic pipe for the d2 pipework .

anyone know where i can purchase one from or any ideas how much it will cost

has anyone got a copy that they can email me.thanks

the working pressure at a meter regulator is measured: a) with one appliance on full rate b)with all appliances on full rate c) withy a cooker on one burner d) when all appliances are in off position. i went with b , but was told that my answer was wrong and the right answers a...

just wanted to know has any1 else come across this type of pipe? and if yes where did you buy a converter for it(to convert into copper)

just a quick question, what would you guys recommend to set the temperature at. Am i right in thinking it should be set at 60-65 degrees

any1 else used the pango for unblocking sinks, and what was your experience.

does any1 know where i can purchase an adapter or convertor with a female thread to go on2 a 3/4 " tundish? for the hepworth self sealinf waste.

does any1 know where i can buy 1 of those from in london below or around 5 litres and unvented. also do they require a d1 and d2 discharge pipe. im aware that any unvented water heaters above 15 litres need to have d1 and d2 pipeworks, but not sure about anything under 15 litres.or should i...

does any1 have any idea how much roughly thames water charge to change the size of the mains supply coming into the/ a building?

hi all im new to this forum, i am seeking work with an experienced plumber, i myself have finished my level 2 in plumbing and am currently studying level 3.I have been working in the field for a year, i have been doing basic plumbing work tap changes, shower installations, bathroom...