Search results

  1. FiveKnuckleShuffle

    Concrete screws or anchors?

    Morning all, I'm putting in a Newel post for a staircase and its a concrete floor. I've bought a bulldog fixing as shown where the post will be recessed for it to locate in the bottom. Fixing this bulldog to the concrete floor I automatically thought to use anchors as have always had success...
  2. FiveKnuckleShuffle

    Install of Newel Post to concrete floor - concrete screws or anchors?

    Morning all, I'm putting in a Newel post for a staircase and its a concrete floor. I've bought a bulldog fixing as shown where the post will be recessed for it to locate in the bottom. Fixing this bulldog to the concrete floor I automatically thought to use anchors as have always had success...
  3. FiveKnuckleShuffle

    Bonding coat to expanding foam

    Hi all. I've moved a light switch and done the bonding coat along the channel after sinking in the twin and earth etc. I have a end part which is around 80 by 50mm which is just a void with nothing such as lathes for the bonding coat to adhere too. Does anyone know if I can fill it with...
  4. FiveKnuckleShuffle

    Light supply cable found in wall crossing a horizontal cable

    Morning all, I've removed a door and frame splitting a hallway in two. This has revealed the supply for the light switch running vertically as normal but it is behind a cable that is running horizontally. Is this acceptable? Its an old sand stone terrace property. Both cables are insulated but...
  5. FiveKnuckleShuffle

    Radiator inlets too near flow/return pipes

    Hi all, With winter on the horizon I'm helping the elderly couple next door. They were dropped in it by a cowboy. They have no radiators fitted but have ones already bought. They were either selected incorrectly or their flow/returns are at old distances. Basically the inlets are nearly...
  6. FiveKnuckleShuffle

    Spray Expanding Foam as insulation

    Wondering what everyone's thoughts are on the attached photo? I'm looking at doing up my loft space at some point and came across this spraying of expanding foam. I always thought best to use the foam sheets with a air gap between its back and the actual roof then board over but is this...
  7. FiveKnuckleShuffle

    Danesmoor Capacitor Removal

    Can anyone give advice on how to get this capacitor out. How does the black plastic cap come off and how do people get into where the nut is on the capacitor thread? Thanks all
  8. FiveKnuckleShuffle

    Replace Danfoss oilpump with Suntec

    Hi all. Does anyone know the best way to select the right Suntec pump in order to replace a Danfoss BFP 41 L3 No. 071N1206 please? It's on a Worcester Danesmoor 12/14
  9. FiveKnuckleShuffle

    Worcester Danesmoor 12/14 - Lockout

    I know there has been previous posts regarding this but I have changed to a new solenoid and bled the valve. This got the boiler running again for about a fortnight to a month and now back to lock out every five minutes. I've took the filter out and noticed quite a bit debris in there but...
  10. FiveKnuckleShuffle

    Shower internal leak - Essentials Mira

    Can anyone suggest if anything can be done to save our shower without replacing please? Shower power light went off on front and after taking the front case off there is a small leak coming from the white top part on the black central area near where it has "INLET" printed on the back face...
  11. FiveKnuckleShuffle

    Anyone help with my problem?

    Hi guys. Im having a right carry on doing the simple task of putting a new light up. My house is old so has the old wire colours, when i have installed other lights in my house i have found 2 of each required wire positive, neutral, earth. In the past all i have done is twisted each pair...
Back
Top