Search results

Hi guys, I'm trying to track a replacement gun metal door handle for my patio door... Any thoughts as to where I could find one? Its 180mm. Many thanks!

Hi guys, looking for tips on how to prep and repaint some flaking paint my external concrete windowsills? I seem to recall using PVA to prime, however, they have failed. I originally used an oil based Dulux all seasons, but plan to use a water base this time round. Many thanks

Hi guys, I've got a simple 12v water tap that acts as a switch to a water pump. Its failed somewhere and I'm unsure if its the tap or the pump that I need to replace? What tests could I perform to trouble shoot this please? I've attached a couple of photos so you can see what I'm working...

Hi there I wondered if you could help? I’m looking for a piece of stainless steel to prevent pull through on the winch point of my boat. However I’m unsure how I could form this to match the contour? Is there anything you could suggest? Many thanks, Steve.

Hi guys, the screws have pulled from one of our kitchen doors and I wondered the best way to go about redoing this? I trust a good quality wood filler, pilot into it and refix. However it just looks like a mess and I didn't want to make things worse. Any tips you could share? Many thanks! :)

Hi guys, I'm in the process of re painting a fibreglass boat and the paint on the inside is pretty solid apart from a few splits. Its original been painted on think and in parts has formed a layer that sits above the fibreglass. Ie you can tap on areas and there is a very slight between (if that...

Hi guys, I've got a polished concrete garage floor and I'm getting board of sweeping water out after storing the car. Is there a simple way to add some drainage so it runs out rather than pools? Thanks ;)

Hi all, I'm wanting to fit an inline water filter cartridge onto this tap and wondered how feasible this would be and if anyone had any recommendations? Also on a side note, the water flow to this tap is pretty poor but I do not see anyway to adjust this? The property used to suffer from poor...

Hi guys I’m looking to replace a failed hex grub screw and thought I’d bought a replacement. However the threads are different. Could someone let me know what type this is so that I can find online. correct one on right. many thanks

Anyone know how I can remove this to replace? Many thanks!

Hi guys, my Bosch oven / grill has decided to trip the electrics RCD. The control panel displays when powered. However when its set to heat it trips. Would this indicate that it requires a new heating element? Are there any tests that I could perform to try and trouble shoot? Any thoughts would...

Hi guys, I've got an issue where I have treated every knot on a shepherds hut that I'm about to repaint (same colour) and am 100% sure that it will flash through as also treated some internal wood with the same solution and covered with a darker paint. Is there a product that I could go over...

Hi guys, I'm about to paint a shepards hut that I've got and wondered if I should be finishing these windows off? Is there anything that I could buy off the shelf that would arch around the half moon window? Should I just trim back the silicone and paint it in? What would you do? I have not...

Hi chaps could someone tell me what type of lock I need for this please? Just looking on Screwfix and not 100% sure? many thanks

Hi guys, I've just painted an outdoor shed that had been treated with Rustins White Knotting and it is flashing through. What would you suggest? I painted with Dulux Ultimate Opaque. Many thanks.

Hi can someone please point me in the right direction for a replacement seal for this door please or let me know what its called? Many thanks ;)

Hi I have a shed and this double switch currently switches an outside light and also an inside light on via the other. I would like to swap the outside light to an always powered PIR with LUX and change to a single switch for the inside light. Is this possible? many thanks

Hi guys, I'm looking for a more permanent power supply to my man cave. I currently run an extension lead to this: I have this under the stairs in the garage that was once used for a water pump. I'm currently using it to power a light. My plan is to bury 2.5mm armoured cable in pipes over...

Hi all I’m about to paint over the pine tongue and grove? In a Shepards hut and wondered if anyone had any tips or suggestions that they could share. Are the knots likely to bleed through or is it presealed? The guy I bought the hut off recommended using a vapour barrier paint? Any suggestions...

Hi guys as the title in about to paint the interior of a Shepards hut that’s finished with pine tong and groove. Do I need to use anything special? Breathable etc? Any particular paint recommendations would be really helpful. Many thanks