Search results

So I have one radiator that only gets slightly warm at the top. It's always been like this since I moved into this house. The flow pipe is hot but return is cold. It's in an extension and was tapped off an existing rad in next room I'm ok with diy so I've tried the following some things a...

Hi all thanks for the replys. Will take a look at best way to do it. Looks like a 4inch vent with a 100mm flex hose seems best option. Thanks

We have a average small size bathroom, about the size of a standard box room. It has a window, that we always open when in the bath and shower, and leave open for about 15mins after getting out. The problem is the ceiling above the shower keeps getting damp patches on it, this is beacuse even...

Free estimates are common in most trades for repairs, im not expecting them to strip it down for a free estimate but a educated guess is correct most of the time. I would never pay for a estimate nor would anyone i know. I run my own business also and do free estimates, people like that...

Thanks for that emm not ! I called them to get a price. I know nothing about boilers myself and have no intension to fix it, unless its something very simple, or electronics based in which case yes i will fix it. I called a few people but they wanted £ just to look at it when British Gas...

Hi Been having a few problems with this boiler would like ideas as to what the fault could be. Its 4 years old, been no problems, then on comes the "B" error light constant and not flashing, a look in the book says try reset etc which i did but no luck, turned off and on many times but as...

Thanks, i take it i only need TRIGA ( just ignore TRIGB and C )

Hi, thanks for the reply to be honest i didnt understand the manual. There is no dedicated point to connect this to on my panel (that i am aware of). I dont understand, do i need just TRIGA connecting from the dialer to pannel or all 3 ? as all i want it to do is dial if the alarm is...

Resolved the other problem. Now i am in the process of setting up my SD1+ Speech Dialler. I have connected the power to it and recorded a message and tested that it can dial and send the message which has worked ok. Im not 100% sure how to connect it to my Nexus 8 alarm pannel ? On the...

Problem now resloved found a old post on here that helped.

Hi All, I am trying to setup the following system its a Nexus 8 panel. We have 4 active zones and this is a 8 zone system. I have done a reset according to the manual but still get the following when i first power on po = power on rr = reset required af = aux fuse failed pt = panel...

The OP didnt say if he had breakers or fuses in the Consumer Unit/Fuse Box

Maybe hard wire the amp via a FCU ( Fused Connection Unit ) that way there is no plug for people to plug anything into.

they are normally left wrapped up in the NTE box, not connected, should they ever be required

Orange, White, Green and Black wires. Usually (but not always) Orange and White are the active pair and go to connections 2 and 5 If possible while you do it just have a phone plugged in to hand and hold the orange and white on pins 2 and 5 and ensure you have a dial tone, if you do re...

Does everyone have the same problem ? if so report it to who ever owns the flats. So they can fix it. You can run as many flats as you want off one aerial as long as its done properly and setup correct with good kit, maybe the aerial has moved or is faulty, or the amplifer its up to the owner...

The LOPT is one of the heavy components on a PCB, what you say is wrong, how many times i see and hear this. If there is a hairline crack on the pcb or a dry joint somewhere (80% are not visiable to the human eye) it can affect the board when you push the biggest thing on it the LOPT. You...

Do not try to fix it, if you dont know what your doing. There is no point in swopping it out without knowing why its failed in the first place, and there is no sure thing that it is the part you suspect is at fault either. Take it to a TV repair shop to get it looked at. LOPT's can be...

I deal with BT on a daily basis. BT dont normally bother, a engineer will have a idea where the socket might have been if you was lucky, all you have to say is you dont know you been there 10 years and it always been like that, they wont moan over a socket, its the first thing they tend to...

Normal way would be a amplifier/distribution box fitted in the loft. Main aerial feed plugs in and you have the out puts to the other rooms. If your in a weak signal area go foor a good quality one they are a lot better than the cheepo ones