Search results

I want to test the continuity of cable from boiler downstairs to the cupboard upstairs, what is the best way to do that?

I was wondering if someone could guide me through adding the selfmon to HA. I have the selfmon VKP on phone, is it one of these I need to configure?

I have a house of myson trv, tried to swop with a Drayton but thread seems different, is that right, wanted to fit some Tado ones but now concerned they won't fit?

I had an electrician run some armoured cable from an outside metal consumer unit to an eV charger. At the consumer unit the cable just enters through a hole, no gland or fixing. Is this acceptable?

I have the Honeywell Galaxy 2-44 ADT alarm system in house I bought, under no contract with ADT. Firstly what door sensors are they as one appears to be broken on mine and giving tamper fault. The other question, the two remaining errors are the number to dial and ARC comms fail, I am assuming...

I am trying to connect wintex via PC com, i have com 1 set to nothing fitted, connecting my USB cable to com 1 on board, set PC com to correct port, in my case com 4, but it just refuses to connect. I have reset system as removed battery and the IP com unit, now need to send the data back to set...

Looking at moving house, how do i register app with new owner? what else do I need to do to hand over to new owner?

Would a Creocote used on new shiplap be better than using say a cuprinol ducksback paint?

I have built a new pc, using an MSI MPG Z390 GAMING EDGE AC motherboard. I want to add a graphics card with 3 monitor support used mainly for videos not gaming. Looking at "MSI Radeon RX 570 ARMOR 8GB OC GDDR5 Graphics Card" Just wondering if anyone else had experience in graphics card and...

I have windows 10 pro running on a 1Gb SSD in my current pc. Can i transfer that HDD to my new PC then transfer the windows licence?

I have a symbol on top right corner with an A in a circle and a diagonal line through it, any ideas what that might be?

I have a ricochet door contact that says in Supervision Fault, how do i reset this after solving the issue i had (Loose sensor not making contact) ? Will I have to put the control panel into a "Commission Mode" and set up every contact sensor again or maybe in wintex just delete the zone #10 (...

I have a 4 channel NVR, that has suddenly stopped receiving video to IVMS4200. Having looked further i see that the NVR is working if i attach a monitor direct, but appears the ethernet port going in stays red, can't ping the IP address either. Tried another cable but same. Anything else to try...

Bought a new phone, generated new app activation code entered this, then asks for user code (one i type into keypad) but won't connect. Any ideas please? message says can't log in can't access smartcom? Noticed far left LED flashing, is that the cloud server down? My wifi light is solid green on...

Is it possible to put a door contact on a van have that contact not supervised so when van not there alarm does not error then have that zone on part set so at night only the van contact is active

Looking to put an alarm in but have no manual or wiring diagram, any idea where I can or best way to find the signal wires for locking/door switches etc? I see on alarm outputs it has a Negative door trigger (-) and Positive door trigger (+). Mine seems to give plus 4v closed (not 12v)? so...

Just wondering, if i put one in my van would it work so if someone broke in at night my alarm ( if that pir was used in part arm) would sound and wake me up?

How do i access the smartcom to see what network it is accessing, think i may have it on a hub used as a repeater and want to change to my main hub ssid Is it basically a case of doing what i did to originally set it up? "Press and hold the WiFi button for 5 seconds until the WiFi LED starts...

Is there a setting anywhere where you can define what notifications get sent via the app?

Today i have connected my cable jac-0001 to premier board but when trying to connect i get " The Com port specified is not available" Worked fine yesterday all that has changed since then was adding a prox tag? Any ideas