Last year we had our boiler replaced, and the plumber changed the system to a fully pumped pressurised system. and hance we had a motorised valve fitted, which im assuming switches between the heating circuit and the HW circuit. My question is can the both circuits be fed at the same time. ie is the switch a CH only or HW only , or can it be both......from the sticky posts im thinking i have the S-PLAN system
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Another ;amen question...
- Thread starter efiste2
- Start date
Yes if it is a Y plan and has a 3 port valve.
Read the FAQs on motorised valve.
It will show you a 2 port valve and a 3 port valve.
It will show you a 2 port valve and a 3 port valve.
You can also have a W-plan, which is usually wired to give priority to the HWS, so no heating until the hot water is up to the set temperature. It uses 3-port diverter valve instead of a 3-port mid-position valve.
It depends on which valve you've got and how it's wired.
http://content.honeywell.com/uk/homes/systems.htm
It depends on which valve you've got and how it's wired.
http://content.honeywell.com/uk/homes/systems.htm
You hold it, I'll play it
If I let you do that you had better know the bluddy tune mate
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
