Bosch condensing dryer

[H&J]

Fitting a Bosch condensing dryer for a customer, instructions show connection to waste needed for water.

Customer very unhappy as nowhere near a sink. Is this normal for all condenser dryers or is there any other way around it?

Thanks in advance

 

[towman]

Depends on the model. Most Condensers have the option of draining to waste OR collecting in a container "onboard" for disposal at the end of the programme. However, Bosch do have a model that is not fitted with a reservoir but is intended to drain direct to waste - this is probably the one you have. Only solution would seem to be to exchange for a model with a reservoir. (alternatively, is it possible to drain outside as there should be no reason why the water has to go down the drain - it has no contaminants in it so could drain into an exteranl soakaway?)

 

[H&J]

Thanks Towman, the customer eventually got through to Bosch, who confirmed it is a dual model, it doesn't mention this in the instructions but all sorted now.