Cut pressure down from shower

[cliff1010]

hi I have just replaced the shower pump on my shower and as we had re modelled the bathroom. at the same time I changed the shower to a low profile one ,now when we have a shower its can overflow the tray. What can I do to improve the water draining away, the floor is now tiled but it had a 40mm waste pipe ? Any ideas please
Thanks Cliff

 

[Madrab]

1) Clean out the shower trap
2) Redesign the waste run so it flows properly
3) Increase to a high flow rate trap
4) Buy a new tray with a 90mm high flow waste and trap

Nothing else will really increase it I'm afraid, you may have to decide to either live with it or sort it out.

 

[cliff1010]

Thanks, may have to wait until after Christmas as the floor will have to come up.

 

[Jackrae]

Or fit a restrictor in the shower head to limit water flow - but that kind of defeats the objective of the shower pump.
Do you need a shower pump ?

 

[cliff1010]

Hi yes we needed a shower pump but now it's almost a pressure washer effect, where can I get a restrictor as it sounds the quickest option if not expensive.
Thanks for the advice

 

[muggles]

Don't turn the shower on full when you're using it? Free fix!

 

[cliff1010]

just googled will get one tomorrow thanks again hope this works

 

[cliff1010]

Got one at the weekend yes works perfect now, no longer flooding the bathroom and saving money also. Thanks for all the advice.