Cutting thin strip from centre of tile

[robjmccarthy]

Hi All,

This is my first post, so appologies if I do something incorrect.

I was wondering if someone could offer advice about ceramic floor tile cutting.

The tiles are 330mm square, and I need to cut a strip out through the middle from 1 edge. This is so that the tile can fit around something on the floor.

The strip needed to be cut out is 150mm long and 20mm wide.

Do I score, and try and nip out (if my nippers are not too wide), or are there other ways?

Thanks in advance for any help given,

Rob

 

[Karis]

You will never nibble it out, you need a wet tile cutter to cut slots.