extending soil pipe

[b21playa]

Hi all

I need to move the toilet as the new shower cubicle with now replace it, so i need to move it over about a meter further out.

Its the old cast iron one, how can i extending this out?

any help appreciated

Thanks

 

[Fluffster]

It all depends where your soil stack is.
You would change it to plastic as fittings are more adaptable.
P

 

[b21playa]

It all depends where your soil stack is.
You would change it to plastic as fittings are more adaptable.
P

its on the side on the house, would be hard to change as roofing for side utility (perspex type) has been cut out for it

 

[Fluffster]

Core drill a new hole in the wall where the toilet is to be located and run plastic soil pipe to existing stack with an adaptor from pvc to cast iron.
You may be able to use the existing branch from the current toilet connection.
P

 

[b21playa]

Core drill a new hole in the wall where the toilet is to be located and run plastic soil pipe to existing stack with an adaptor from pvc to cast iron.
You may be able to use the existing branch from the current toilet connection.
P

thanks, makes sense

what about the difference in the angle, the further you go, the higher up the pipe with end up.

cna i get an adaptor that chnages the angle slightly?

 

[Fluffster]

You may have to change the stack to plastic from the branch up to get the right angle.
Have a look here to get some idea.
Screwfix are among the cheapest suppliers.
Pete

http://www.marleyplumbinganddrainage.com/sw_design.asp#j

 

[b21playa]

You may have to change the stack to plastic from the branch up to get the right angle.
Have a look here to get some idea.
Screwfix are among the cheapest suppliers.
Pete

http://www.marleyplumbinganddrainage.com/sw_design.asp#j[/QUOTE]

cheers mate

a project that will done be done quite yet but at least i know how it will be tackled.

got loads other jobs to do on the house