1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Hotpoint ultimate RPD10457J not switching on

Discussion in 'Appliances' started by Lar2084, 15 Sep 2021.

  1. Lar2084

    Lar2084

    Joined:
    28 Oct 2008
    Messages:
    6
    Thanks Received:
    0
    Location:
    Middlesex
    Country:
    United Kingdom
    I have a Hotpoint Ultima S-line RPD-10457J which is not switching on. I have checked the manual and it just says to change the fuse, which I have done but it is still not working. Has anyone any clues as to what is wrong before I report to calling in a technician please. I’m a pensioner so wish to avoid expensive repairs. Thank you.
     
  2. Sponsored Links
  3. jj4091

    jj4091

    Joined:
    1 Dec 2006
    Messages:
    5,158
    Thanks Received:
    482
    Location:
    Cumbria
    Country:
    United Kingdom
    Have you tried plugging it into a different socket & will something else (perhaps a kettle) plugged into the washer socket work?
     
  4. Lar2084

    Lar2084

    Joined:
    28 Oct 2008
    Messages:
    6
    Thanks Received:
    0
    Location:
    Middlesex
    Country:
    United Kingdom
    No I haven’t, I will try that next thanks
     
  5. Lar2084

    Lar2084

    Joined:
    28 Oct 2008
    Messages:
    6
    Thanks Received:
    0
    Location:
    Middlesex
    Country:
    United Kingdom
    That didn’t work either.
     
  6. Sponsored Links
  7. jj4091

    jj4091

    Joined:
    1 Dec 2006
    Messages:
    5,158
    Thanks Received:
    482
    Location:
    Cumbria
    Country:
    United Kingdom
    If the kettle worked OK then you have ruled out a supply problem. Unless you have a multimeter & are competent to use it then sorry there is not much else you can do yourself.
     
  8. Lar2084

    Lar2084

    Joined:
    28 Oct 2008
    Messages:
    6
    Thanks Received:
    0
    Location:
    Middlesex
    Country:
    United Kingdom
    Thank you, I have checked “Nextdoor” website and there is one technician who is highly recommended by lots of people so I am going to call him.
     
  9. Harry Bloomfield

    Harry Bloomfield

    Joined:
    30 Dec 2018
    Messages:
    8,509
    Thanks Received:
    1,173
    Country:
    United Kingdom
    Maybe the internal fuse has blown, on the PCB - it might be just old age, or blown due to fault.
     
  10. Lar2084

    Lar2084

    Joined:
    28 Oct 2008
    Messages:
    6
    Thanks Received:
    0
    Location:
    Middlesex
    Country:
    United Kingdom
    Thank you, I don’t think that would be something I could undertake so will ring a professional. At least I know what it could be.
     
Loading...

Share This Page