ideal classic

Discussion in 'Plumbing and Central Heating' started by njec, 11 Nov 2006.

  1. njec

    njec

    Joined:
    16 Oct 2006
    Messages:
    14
    Thanks Received:
    0
    Location:
    London
    Country:
    United Kingdom
    Hi Can anyone help. I have a Traditional S plan system 2 zone valves etc. I have just drained down heating side. I have 7 rads and fitted 6 trvs leaving one normal. The problem is that the boiler doesn't seem to stay fired up for long on heating only and one rad makes a gurgling noise ( been bled no air coming out)
     
  2. ollski

    ollski

    Joined:
    8 Oct 2003
    Messages:
    7,092
    Thanks Received:
    544
    Location:
    Bristol
    Country:
    United Kingdom
    There will be a screw on a bit of vertical pipe work normally near one of the valves to bleed your pipework, also need to check the header tank is filling with water. When you say no air is coming out the rad when you bleed it do you mean water alone is?, or nothing at all?
     
  3. Sponsored Links
  4. njec

    njec

    Joined:
    16 Oct 2006
    Messages:
    14
    Thanks Received:
    0
    Location:
    London
    Country:
    United Kingdom
    Thanks. water is coming out of rad not air.
    In airing cupboard there are two vetical pipes that seem to have a hand tightening type nut not sure which one to undo
     
  5. ChrisR

    ChrisR

    Joined:
    24 Jul 2003
    Messages:
    24,299
    Thanks Received:
    1,407
    Location:
    London
    Country:
    United Kingdom
    Try both!
     
  6. DIYnot Local

    DIYnot Local

    Joined:
    3 Sep 2019
    Country:
    United Kingdom

    If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

    Select the supplier or trade you require, enter your location to begin your search.


    Are you a trade or supplier? You can create your listing free at DIYnot Local

     
  7. Sponsored Links
Loading...

Share This Page