Last step refinishing

[crosscut]

(sorry if this is not the right place to post this)
Hey guys, New to the place and kinda new to refinishing wood.
Wanna ask about last step in refinishing a dining table. Done all the stuff of staining and 3 steps of poly coating it. I sanded with 220 1st code, 320 2nd coat and 400 last coat. Also cleaned between each sanding. It is smooth as a babies butt and has a deep shine but I'm still not totally happy with the looks of the poly. Has a little bit of a hazey look to it.
What I was wondering, Can I sand it one more time, but instead of using poly to bring the shine back, plus I don't want to much of a poly build up, is there a wax or something I could use? Oh yeah, I used MinWax cherry stain and MinWax poly.
Hope I haven't confused you! LOL!!
Thanks!

 

[petewood]

Sand back with 800, apply beeswax or good quality furniture wax and buff.

Did you brush or spray on the poly, sometimes it hazes if you spray in cold/damp conditions.

 

[oilman]

Then strip it all off, and oil the wood like you should have done, hard man-made coatings are not the thing to use with something natural ........like wood.