Miele W5741 washing machine

Discussion in 'Appliances' started by Duncan Strachan, 12 Jul 2021.

  1. Duncan Strachan

    Duncan Strachan

    Joined:
    12 Jul 2021
    Messages:
    2
    Thanks Received:
    0
    Country:
    New Zealand
    My W5741 Miele washing machine is making a scraping noise when the drum turns. Its not metal on metal but may be from rubber or plastic catching something. Its doesn't do it for the full 360 degrees. Thank you for any advice.
     
  2. Harry Bloomfield

    Harry Bloomfield

    Joined:
    30 Dec 2018
    Messages:
    9,591
    Thanks Received:
    1,297
    Country:
    United Kingdom
    Does it make the same noise with no load in it? Have you inspected the belt? Might there be bra wires trapped between inner and outer drum?
     
    • Thanks Thanks x 1
  3. Sponsored Links
  4. Duncan Strachan

    Duncan Strachan

    Joined:
    12 Jul 2021
    Messages:
    2
    Thanks Received:
    0
    Country:
    New Zealand
    Hi Harry, thank you. I have just established that the inner drum is off center. I removed the door seal from the drum and the noise stopped straight away. I am now out of my depth as I am not sure what caused the drum to be off-center. It may be bearings.. but beyond my skillset.
    Thanks again for your input.

    Kind regards
    Duncan
     
  5. Harry Bloomfield

    Harry Bloomfield

    Joined:
    30 Dec 2018
    Messages:
    9,591
    Thanks Received:
    1,297
    Country:
    United Kingdom
    I've never heard of it, but I would guess at a bent drive shaft, or drum.
     
  6. DIYnot Local

    DIYnot Local

    Joined:
    3 Sep 2019
    Country:
    United Kingdom

    If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

    Select the supplier or trade you require, enter your location to begin your search.


    Are you a trade or supplier? You can create your listing free at DIYnot Local

     
  7. Sponsored Links
Loading...

Share This Page