New toilet waste too close to soil pipe

[kdLeeds]

I am refitting a bathroom & the new position of the toilet means that the 4" waste pipe that goes through the wall & joins the soil pipe is too close to the soil pipe to get a 'T' connector in.

The side of the outlet tube will touch the side of the soil pipe (if you follow what I mean)

4" to the right, & I would have been able to connect straight in to the back of the soil pipe.

4" to the left & I will have room to fit a connecting 'T' piece

Are there any really tight bends? (not too tight for obvious reasons) or other suggestions.

With thanks

 

[ChrisR]

No you have to go away from the pipe, down, and tee in lower. Unless you can get a 45 in the thickness of the wall - difficult, depending on the situation.

 

[kdLeeds]

Both are possibilities I hadn't thought of.

Many thanks