Nexus 8 setup problem

[systemtek]

Hi All,

I am trying to setup the following system its a Nexus 8 panel. We have 4 active zones and this is a 8 zone system.

I have done a reset according to the manual but still get the following when i first power on

po = power on
rr = reset required
af = aux fuse failed
pt = panel tamper
t8 = tamper alarm
t7
t6
t5
t4
t3

I have checked the fuses and they are fine. This system has been powered off for some time, and i have come to try to finish the install off and get it working but no luck.

Any ideas ?

Thanks

 

[systemtek]

Problem now resloved found a old post on here that helped.