scantronic 9651 EN

Joined
22 Dec 2004
Messages
90
Reaction score
1
Country
United Kingdom
Hi Recently purchased a scantronic 9651 panel, seems its wired slightly differant than other panels. Normally I run a 4 core from the entry/exit door contact connect to zone 1 end of story (usually 1 is entry/exit) but this panel does'nt seem to have a dedicated E/E is this difficult to set up,
for the first time.

thanks for any help

Oldspark
 
Sponsored Links
Joined
20 Nov 2007
Messages
2,954
Reaction score
268
Country
United Kingdom
What does the manual say :?:

You do have the manual don't you? :rolleyes:

Go to page 13 for the wiring & page 20 programming, easy peasy. :)
 
Joined
22 Dec 2004
Messages
90
Reaction score
1
Country
United Kingdom
thanks for the reply

Yeh I have the manual ok, its just I was expecting a dedicated E/E zone and was curious when I read through it you had to set it up and am curious as to how easy this is when its the first time.

OS
 
Joined
22 Dec 2004
Messages
90
Reaction score
1
Country
United Kingdom
Also sometimes its clearer when somebody says "press any key, enter this, then enter that to set it up rather than trawling the manual.

OS
 
Sponsored Links
Joined
22 Dec 2004
Messages
90
Reaction score
1
Country
United Kingdom
So If I connect the door contact into cct 1 the panel defaults this to the entry/exit zone cct 2 zone 2 and so on, untill all zones are complete. (is this correct )

OS
 
Joined
28 Oct 2005
Messages
31,282
Reaction score
1,996
Country
United Kingdom
You've got the manual, why do you want someone else to trawl it for you?
 
Joined
20 Nov 2007
Messages
2,954
Reaction score
268
Country
United Kingdom
You've got the manual, why do you want someone else to trawl it for you?
Because

"sometimes its clearer when somebody says "press any key, enter this, then enter that to set it up rather than trawling the manual",

missed that one did you Joe?

p.s. I can never find 'the any key', there never seems to be one on any keyboard I've ever owned. :LOL:
 
Joined
28 Oct 2005
Messages
31,282
Reaction score
1,996
Country
United Kingdom
No what he means is he's too lazy to look himself. :rolleyes:
 
Joined
22 Dec 2004
Messages
90
Reaction score
1
Country
United Kingdom
I take the your point about the manual ..........
Its just its good to get answers to peoples questions on forums as I have found answers to my questions sometimes help others aswell a'nt that what forums are for..

Anyway whats the answer about the entry/exit zone

OS
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Top