am about to install shower booster pump do you have to fit surrey flange on hot water cyclinder feed side,and can you fit the supply side from the pump back in to vent pipe on top of the cyclinder
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
shower booster pump
- Thread starter adrianmole
- Start date
why do you want to fit the supply from the pump back into the vent pipe for ?
that go's to the shower feed.
that go's to the shower feed.
would the pump ,pump the water back in to the tank ie from the vent pipe as this is pipe straight of the top of the cylinder from where am going to install the pump
i don't think you quite understand how it works.
you don't want it to pump back into the tank.
if it does you have f*ked up somewhere.
hot feed from cylinder to pump then from pump to shower mixer.
cold feed from tank to pump then to shower mixer.
it should never pump back to tank.
you don't want it to pump back into the tank.
if it does you have f*ked up somewhere.
hot feed from cylinder to pump then from pump to shower mixer.
cold feed from tank to pump then to shower mixer.
it should never pump back to tank.
Make sure the cold water outlet is below the hot water outlet!! (on header tank)
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
