Shower Floor Lifting

PJK

Joined
14 Mar 2005
Messages
6
Reaction score
0
Country
United Kingdom
Wet room installed 6 months ago - tiler used 18mm marine ply and epoxy resin (?painted on waterproof stuff??). The grout has now cracked along the side of the tiles - I have tried scraping out & re-grouting, but it has cracked again and now there is movement in the tiles.

I have dried out the room using a dehumidifier - should I try regrouting or do I have to take the tiles up & start again?

Needless to say, tiler is nowhere to be found.
 
Sponsored Links
No idea - it was black & supposedly cost £50 a tub.
 
you needed a modified adhesive, that means one that is flexible. the same for the grout, re-grout using a flexible grout to absorb any movement in the floor. as for the adhesive used, it should have been in a bag not a bucket
 
Sponsored Links
Many thanks - the grout I used before wasn't flexible, so I shall have another go. Thanks again.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top