GOt a trevi boost which only gives an adequate shower temperature with the temeprature control handle set to absolute maximum.
Didn't used to be like this.
Apparently there is a wax seal inside which I can take out to control the temp manually, at the expense of the mixer no longer being thermostatic.
Does anyone know about this?
We have good hot water pressure - its scalding hot from all other taps and the bath above which the shower is mounted. The mains cold is also ok.
Didn't used to be like this.
Apparently there is a wax seal inside which I can take out to control the temp manually, at the expense of the mixer no longer being thermostatic.
Does anyone know about this?
We have good hot water pressure - its scalding hot from all other taps and the bath above which the shower is mounted. The mains cold is also ok.