warped door

[bster]

Whats the best way of unwarping an internal pine door?

I've made a 'jig' out of 6X2 and clamped the door then poured water over it aleft for a couple of days but no change?

any ideas?

 

[masona]

Put a timber depending where the warp is, let say at the bottom so put a timber at the bottom so the door cannot shut and make a hook at the top of the door and hook it to the other side of the frame and pull it in and lock it somehow. The old way we used to screw the 45 degree angle batten on the top corner of the door, don't forget you may get stuck in the room for the next 24 hrs