 |
Product worked well and removed uv damage to top of perspex on my MR2. I imagine that this will need to be done periodically but there is plenty of the product left and it is cheap to buy. It favourably compares to the competition, most of which use wet and dry sanding pads, which is an aggressive fix. Be prepared to take your time, apply elbow grease and smile at the result.
Verified purchase: Yes | Condition: New
I tried this today on my Mercedes e280 lights as I have clouding on the top of the light. I followed the instruction, masked round the light, applied the paste on to the cloth and started rubbing after around 10 mins I thought best to check on progress so clean the paste off with a separate cloth I had to buy. Not even a slight dent was made. I tried the process again but the result was the same, I also tried on the other light with the same result. I used the sealer but ensure if this did anything. wish I bought the 3m kit now
Verified purchase: Yes | Condition: New
Looked at this product in Halfords retailed at £18, I paid £8 including free postage. Purchased it being cautious as reviews are varied. Prepared both headlights and did 1 at a time, for roughly half an hour buffering for each light. Would say it got rid of about 75% of the yellowing and still had noticeable marks on headlights. I don't know if mine had gone too damaged to get it back to near new but I wouldn't say it is as it claims in the bottle you will have like new shiny headlights. Product was easy to use but could of done with advise on how much to apply as I still have half a tube left in each container. Could of also done with 2 cloths to apply the 2 different products. Hopefully my pictures will show a difference.
Verified purchase: Yes | Condition: New
it does what it says on the tin - removed white foggy blemishes & some edging yellow areas with more than one application - but hey some elbow grease is required btw - gets the headlamps back to looking brand new - more than happy with the end result - I bought this product on an impulse buy thinking it might make a bit of a difference but no it it really did exceed my expectations - 5 star rating no prob.
Verified purchase: Yes | Condition: New
This was very good, I put plenty of the T Cut on the lamps, and used my electric car polisher which made very quick and efficient work of this. Used on two very yellowed Suzuki Ignis lights on our 2002 car, so as you can imagine they were quite far gone. MOT tester had said that they were borderline and would definitely fail next MOT, but having used this kit they are much improved and all the yellowing has gone - they are now clear. I put one coat of the sealer on, which was simply done with a cloth. I have it in mind to do another sealer coat to make sure well sealed. Work done about two weeks ago, so obviously can' t say long term, but I think it should take a long time for the yellowing to be of any significance again.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Touch-Up Materials
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Touch-Up Materials
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
