i have extended my bt line into the lounge where my landline+sky broadband modem will be sited..the cable is 2 core white/orange a/b at origional master skt in kitchen...to reactivate my bt line before i move into the property i need to connect the joint + refit a new master skt( also sky wont do my housemove installation until this is done!) can anyone tell me the correct method i should use to carry out this termination & any particular terminals/crimps/connectors to use...i am aware there is voltage present down the line...and finally it is a 2 wire supply orange & white cores which were connected to a & b on the old master skt...but i want a bran new master skt in the lounge..but i know i need to get the right type! anyone tell me what type this is likely to be on the info given cheers again