- Joined
- 12 Apr 2020
- Messages
- 466
- Reaction score
- 0
- Country
I'm at the final stages of plumbing in my bathroom, I'm a beginner.
As you can see in the photo I have this space saving pan connector, then I have a length of 110mm pipe. I didn't really need this as I'll box it in, and I had black 110mm anyway.
Is this the correct way to do it? Pan connector to straight 110mm pipe, until it gets outside and then just connect to the soil stack with a 110mm elbow?
Or should I be using a straight coupler inside and two shorter bits of pipe? I'm thinking about if it needs to be dismantled, checked etc?
Any advice?
Thanks
As you can see in the photo I have this space saving pan connector, then I have a length of 110mm pipe. I didn't really need this as I'll box it in, and I had black 110mm anyway.
Is this the correct way to do it? Pan connector to straight 110mm pipe, until it gets outside and then just connect to the soil stack with a 110mm elbow?
Or should I be using a straight coupler inside and two shorter bits of pipe? I'm thinking about if it needs to be dismantled, checked etc?
Any advice?
Thanks