I need to cut into a plastic box.
I've marked where I need to cut. See this pic:
I started cutting with a jigsaw drill. Not the tool for this job for many reasons!
Really hard to control + dangerous!
The scratches you might be able to see are attempts at me trying to score using an etcher I had. I also tried using a weak stanley knife. Both failed miserably.
It's really important I can keep the bottom lip and the structure of the box if possible.
Hoping someone has a suggestion.
On another box I tried, the plastic shattered and I ended up having to use duct tape to secure. Totally messed up!
Thanks
I've marked where I need to cut. See this pic:
I started cutting with a jigsaw drill. Not the tool for this job for many reasons!
Really hard to control + dangerous!
The scratches you might be able to see are attempts at me trying to score using an etcher I had. I also tried using a weak stanley knife. Both failed miserably.
It's really important I can keep the bottom lip and the structure of the box if possible.
Hoping someone has a suggestion.
On another box I tried, the plastic shattered and I ended up having to use duct tape to secure. Totally messed up!
Thanks