Recent content by 3owenspl

And the floor settled 1 inch on the side of the 6x6

USA

I don't know if the picture is really showing what I'm doing that beam stops at the black column the beam is only 10 foot 4 inc long. The joist are different sizes that's why I padded them to make the them all the same. It's not working because those pads are being compressed and not holding up...

There are two different size joist to I sister all joist and make them all the same width from the top of each of the joist that are already there

There not lifting the bottle jack and 6x6 is..... how do I get it to right height I know these things I'm asking how to do it.

Here is some more

Here is some pictures i attempted to pad out all joists to 10 1/4 which is not working because the low side of the floor that is taking all the jacking pressure the pad is cracking and sinking in to the beam

I'm trying to level my kitchen floor. I made 2x8 beam out of 3 2x8 10 foot boards. Bolted it together and screwed it. Then I measured the joists some are 2x10 and some are 2x8. How do I fill in those gaps? I tried using ripped 2x4s but they cannot with stand the force I'm lost don't know what to...