for blades for worx ..these peoiple are the main dealers ..I have bought off them ..and had no problems with them.
http://www.gr8spares.co.uk/
all the best.markj
Worx handycut wx424
I bought one a couple of months back ..
not had chance to use it
but it seems to have bolts/screws missing out of the guard (inner gaurd)..the gaurd holds the sole on ...so is relevent
This means that it is only held on, around a small area on the arbor housing, and...
never mind I found some.
doing a google search was able to find old ebay listing for them
phoned up the number on the ebay ad ..
and they listed the two they had left ..
and I bought ..
all within 10 minS :)...
Tried all the plumbers merchants around here (north wales)..they can only supply me with 20 ..which they do not have in stock..and i need only one.
do what ever you will, put one on ebay ..say £3 plus £2 carriage if you like.
its going to be used with 10mm bore copper pipe.
all others...
I'd be more concerned that if its energised so long ..that it would add to my electricity bill ..
so how much do these things use over a year .
even a tenner is too much
all the best.markj
About 30 years ago, I put in a central heating system in a rush ..and it wasn't very neat .
One part of it has the two 10mm mini bore pipes coming down the side of a door frame buried in the wall....lots of trouble with plaster cracking all the time ..and I'm just about to replace the frame...
Another thing that crosses my mind ..with me in the bath scenario ..and the immersion heater failing because its corroded through ..
Is........the RCD failing to trip because of accumulation of time and wear on it .
the bonding at the electricity main riser may be OK on the day its tested...
The gas pipe coming in from the street is plastic ..so what good would bonding within 600mm of it do ?
im just asking questions ..just because i have an interest in this ..
all the best.markj
ban all sheds .
yawn ..
I never argue
youre just wearing out your fingers and your brain .
very special all the best..and keep taking the tablets ..markj
The thing is ..whats right in some people heads is wrong in others .
like i said ..you could loose a house sale over it because a surveyor mentioned it on the survey.
weather the bonding does what it does doesn't matter .but it does make something look more professional in some peoples eyes...
well i don't know if this is relevant to it ..
a few years ago my electricity was tripping the rcd on the odd occasion ...i did not put two and two together....and work out that it was the immersion heater .until after about the 3rd or 4th trip ..when it didn't want to reset ..
until i...
I think it needs to be done anyway ..whatever the rules ..because you have ptfe on joints ..etc ..the more you can connect everything up ..the better you are protected...a rad could be non conductive through its inlet pipe ..but conductive through its return pipe...and for what it costs when you...