Recent content by Al@n

Replaced Mira Sport Electric Shower Solenoid Coil part number - 1746.437. All working now :) many thanks @terryplumb

No worries, thanks, I'll test the solenoid, I hope that's the culprit. Will report back

Great, I'll test the solenoid, is there anyway to test the PCB?

If the solenoid is fine, what else could it be? Anything else I could test?

Hi, Shower stopped mid-cycle and now fails to pass any water through the system, I have checked the water filter, checked the PCB cable is on secure, but nothing. All lights show correctly, and it sounds as if it is trying to pump the water, but not even a drop comes out; regardless on...

In our case the pipe is not chrome, it is 8mm copper pipe

We have a gas fire that was fitted a number of years ago by a gas safe engineer, never had an issue when serviced in the past. Today we had it serviced (different engineer) and was informed that a gas restrictor valve should have been fitted instead of a gas isolation valve!? Is there a...

Bump anyone

The camera i'm intending to install are hikvision with the backbox I will be using the DS-1280ZJ-DM21 backbox To achieve a water tight connection from the conduit to the hikvision backbox, what fittings are required? Will a drip loop be required if running horizontally? if so what fittings...

I thought as much :( A couple of other options I've thought of: Option 1 run conduit from location of cctv camera into soffits and then push the cable through as far as I can into the loft using the rods and then to the desired location or Option 2 run the conduit from the location of cctc...

Planning to install 2 cctv cameras, the camera will be fitted approx 2.4 - 2.6 metres in height, yellow circle. The camera will face towards the driveway (yellow circle) The second camera will be fitted at the rear garden The cat6 cables need to be routed to the lounge which is at the rear of...

No it's in 2 degree increments

The temperature on the thermostat itself

So let's say the room temp is 18c and I set the thermostat to 18.4 the heating won't come on unless I set it to 18.8c I've also noticed when the heating is on the heating goes off before reaching the desired temp by at least 3c

Ideal vogue boiler which has a ideal RF wireless PRT3 thermostat. It is shockingly inaccurate, it is at least 3 degrees out and doesn't display the room temperature correctly! Can anyone recommend an accurate wireless thermostat preferably one that can be controlled via an app not interested in...