I am new to using an Easydrive Concrete Screw procedure
Is there a laid down recommended procedure for a wooden gate post onto brick? Some say don't drill the brick. Can the pilot drill also cut through the post or is it necessary to use a drill for wood?
Thanks
I suspect the CH 3 Port Valve of possibly sticking!
I removed the electrical top box to expose the valve shaft. I rotated the shaft with a spanner quite easily.
When viewed from above, I note the shaft can be rotated from 5 to 12 position thru to 10 past 12 position. This seems a rather...
Suggest slackening the centre gland nut a little first!
Of course, as also suggested , make sure you can find and operate the external stop cock.
Infact why not go to the ext one first and leave the internal one well alone!
About 4 months ago the room thermostat started to click ON and Off just like a 'Metronome', clicking approx once a second. After pressing all user controls, the only way I could get it to stop clicking was to remove a battery.
I checked the batteries, they were 1.5V each. I changed them for...
Thinking of setting my daughters washing machine up in the scullery just around the corner from her fitted kitchen.
What's the thoughts of using currently available tapping points on sink tap and waste outlet?
Using the extra long pipes, I can easily thread them along between the walls...
Not sure of the wording to use? Basement or Cellar!
If a basement/cellar is to be incorporated into another house being built on the site of a removed old house. Can anyone tell me the minimum ceiling height which is allowed including head clearance on the steps leading down?
Note: this...
The room stat was renewed 3 months ago. It has worked ok up until now.
In the last few days it has taken to making a clicking noise twice a second, much like a fast grandfather clock or music metronome! This only happens once every few days!
I have changed the batteries, but this makes...