Recent content by alankd

cant i just mark the cables correctly, as no earth is needed if i'm reading the instructions correctly. no Earth connection is required for the correct and safe operation of the RT300, but a parking terminal is provided to connect an Earth wire if one is present

Hi wanting to change an old Honeywell room thermostat to a Salus RT300 and would like to check I have the wiring change over correct before I go ahead . The old Honeywell is 3 wire the Salus is 2 wire. 1 goes to Live on Salus 2 terminate as not needed 3 to SL on Salus Alan

Hi I'm having a heat only boiler replacement and i just want to check if the the new one i have been quoted for is up to the job. its replacing an old Potterton Netaheat 16/22 with a Worcester 18RI. The question is, is the New 18kw powerful enough to replace an old boiler rated at 22kw...

Many Thanks ChrisR, will give that a go.

excuse my ignorance but which bit of the head comes off, the chrome top or the white housing. Thanks

I want to remove a radiator for decorating. I have set the Drayton Thermostatic valve to Frost, and switched off the other side. water is still coming out under pressure from the bleed valve so I assume that frost setting is still allowing water through. I have found on the forum some people...