Recent content by Andrew N

The control knob on my dishwasher has snapped. I can still use it, but it keeps coming off. I have ordered a new one, but don't know how to fit it. It appears to me that if I unscrew the two screws on the side and the two on top of the control panel I should be able to access the inside & so...

Baxi Solo 30HE (or HE30). System is fully pumped with electrically-operated zone valves for HW & CH ccts.

System is fully pumped, only change was the boiler - from an old 10,000BTU unit to a Baxi Solo HE30. Could it be that the pump speed had to be increased to cope with a condensing boiler? Many thanks for your interest, Andrew N

I replaced my conventional boiler with a condensing variety. The rads in my bathroom & en-suite run off the HW circuit (vice CH circuit) and used to keep the rooms heated for the duration of the run time of the HW cct. Now, at best, they heat up when the HW system fires up, then cut off within...

A sideways solution - you might like to consider applying a thin coat of black grout on top of the existing colour, then it doesn't matter about dirty marks. _________________________________ lynda, moderator I bet he has done it by now, this post was made over a year ago